Small lots, hot summers
South Gate is one of the most tightly built cities in southeast Los Angeles County. Many homes date from the 1920s through the 1950s, on narrow lots with backyards that end at a block wall a few steps past the patio. When a pool fits back there, the deck around it is usually narrow too, sometimes just a few feet wide on one side. That means every square foot gets used: for chairs, for kids running from the house, for the grill. A deck that is cracked, stained or blazing hot is hard to ignore.
Inland LA summers are long, and from July into September afternoons often push into the 90s or higher, with Santa Ana winds in the fall adding dry heat. Bare concrete and old painted decks soak up that sun. A lighter textured coating can make a real difference in how the deck feels under bare feet.
What wears out decks in South Gate
- Old paint and patches. Many decks here have had several layers of paint over the years. Paint peels where water gets under it, and each patch looks a little different from the last.
- Hard-water scale. Southern California tap water is hard. Splash-out and topping off the pool leave white mineral rings and crusty edges, especially near the waterline and steps.
- Settling and cracks. Older decks were poured without much reinforcement. Over decades they crack, and narrow sections near walls and gates tend to tip slightly.
- Sun damage. UV breaks down cheap coatings, and dark colors fade unevenly.
Our coating process
Look first. We walk the whole deck, test the old finish and note every crack and loose area. If a section has lifted or tipped more than a coating can hide, we will tell you up front.
Prep the concrete. Old paint and failed coatings come off with a grinder so the new system bonds to clean concrete. We remove scale buildup, open the surface and clean out the joints.
Repair. Cracks are routed and filled with a flexible material. Chipped edges at the coping and steps are rebuilt with a polymer patch.
Coat. After a primer, we apply a textured finish such as a spray knockdown or a broadcast-sand texture. A UV-stable topcoat with fine grit seals it and keeps it slip-resistant. On narrow decks, we take extra care masking walls, gates and the pool tile so nothing gets overspray.
Colors that stay cool
Light colors reflect more sun. Light gray, tan, sandstone and off-white are the most practical choices here, and they pair well with the stucco walls and terracotta tones common in South Gate yards. If you want a little more interest, we can add a second tone to the texture or a contrasting border along the coping.
Planning more work around the house? We also coat garages and drives. A matching driveway coating on a long, narrow drive can tie the front and back of the property together, and our garage floor epoxy handles the garage or a converted workshop.
When to schedule
Spring is the most popular time, before pools open for the season. Fall is a close second, once the worst heat is over. We can coat in summer by starting early and keeping the hottest part of the afternoon for curing time. Rain is rare most of the year, but we avoid the stretch right before a winter storm. Most South Gate decks are small enough to finish in two to four days.
Keeping it looking good
Hose the deck off regularly, and wipe up splash-out when the water is hard so scale does not build up. A soft brush and mild cleaner take care of sunscreen and dirt. Keep chlorine buckets and acid off the coating. Plan on a fresh topcoat every few years to refresh the color and texture.
Common questions
Do I need to drain the pool? No. We cover it and work around it.
Can you coat a deck that has been painted many times? Yes. We grind it down to sound concrete first so the new coating lasts.
Do you serve nearby cities? Yes, including Lynwood, Downey, Huntington Park, Cudahy and Bell Gardens.
Get your pool deck ready for summer
Call (323) 672-4087. We will measure the deck, check the cracks and give you a written price.